Flex3Drive G5 mount for Sapphire-S printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom made mount plate to fit the stock hot-end in the twotrees Sapphire-S 3D printer and allow a Flex3Drive extruder…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Custom made mount plate to fit the stock hot-end in the twotrees Sapphire-S 3D printer and allow a Flex3Drive extruder to connect to it.
The cut-out lip is needed to accommodate this hot-end mount
Print Settings
Printer:
E3D BigBox
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Filament:
3D Filaprint PET-G
Black Post-Printing =============
I used metal inserts pressed into the plate to bolt into. Use a thin-tipped soldering iron set to a low temperature (180C) to press the inserts down into the deep holes.
How I Designed This
Fusion 360
Category: 3D Printer Parts