1 / 3
Cutting dies storage for Ikea Kallax
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A storage for cutting dies and more to be made with a cnc
- Rating
- 0 / 5
- Likes
- 43
- Downloads
- 83
- Makes
- 0
- Views
- 2,011
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The wife needed a storage solution for her cutting die's used for paper crafting. I designed this first in Fusion 360 (design file) and then used the CNC to cut the board.
I used 4mm MDF for the drawers and 12mm plywood for the sides. Made a little mistake on the width off the drawers so ended up 3d-printing some spacers to go on the sides between the ply and the Kallax.
The cutouts in the plywood are 4mm or ⅓ of the thickness of the material you use.
Use any material or size you want or have, just adjust the width the correct way.