Mini Disc - Rack
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€11.86 – €14.49 net (excluding VAT)
For file: prusa-mini_md-rack-no-sleeves_0.2mm_PLA_MINI_13h10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €13.18 excluding VAT (range midpoint).
- Weight reported by the author
- 165 g
- Print time reported by the author
- 13.17 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tired of the Sleeveless Mini Discs laying around? well... Now you can store them nicely in this MD rack design!
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 271
- Makes
- 2
- Views
- 1,640
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
MiniDisk - Rack
Since I own a ton of MD's without any sleeves/cases around it I decided to make a Rack so they can fit in snuggly without the sleeves. There are 2 holes in the back of them so you can hang them up in 2 ways. If you like HoneyCombs I also included one so you can stack them up or make a honeycomb grid on the wall...
PLEASE NOTE! ONLY FOR MD's WITHOUT SLEEVES FIT IN IT!
No support is needed when printing. I even printed one with the front side on the bed to get that nice Prusa Textured PEI Sheet to look and the bridging was perfect!
I printed mine with FormFutura's Volcano PLA Black.
Support:
Doesn't Matter
Resolution:
0.2mm Layer Height
Infill:
10% Grid