Xtool M1 Riser
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.93 – €3.58 net (excluding VAT)
For file: BondTech_Xtool Riser v3_0.16mm_PETG_VPS Data BondTech_3h7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.26 excluding VAT (range midpoint).
- Weight reported by the author
- 47 g
- Print time reported by the author
- 3.11 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a riser that can easy be extended, a 50mm and 100mm in a single print
- Rating
- 4 / 5
- Likes
- 21
- Downloads
- 232
- Makes
- 1
- Views
- 2,357
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a simple riser designed for the Xtool M1
it allows you to rise 50mm or 100mm or even beyond that as it is designed to extend itself
there is a tolerance of 0.4mm to make sure it can fit the extension
please use at own risk
it can be printed with out supports
but make sure you put the “knob” at the top for the best print result
the holes can be easy bridged and even if they are not bridged nicely it will still work
Settings i used:
5% infill
3 top/bottom layers
2 walls
Gyriod
PETG
to increase rigid you could increase infill , but in my case it is strong enough with 5%
Enjoy
Greetings from PowerChaos