Mega_Zero_2.0_LJ18A3_8_ZBX mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for inductive ABL Mega Zero V2.0
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Mount for inductive ABL Mega Zero V2.0
Setup Hardware
Big thanks to
for solving my issues. For Mega Zero V2 you will need to use a 1K resistor between BLUE and BLACK wire to make it work. and a 6.8K for the V1 or other printers using 12V.
Klipper Config
[probe]
pin: ^!PC4
x_offset: 47
y_offset: 17
[bed_mesh]
speed: 150
horizontal_move_z: 8
mesh_min: 102, 35
mesh_max: 285, 225
probe_count: 5,5
[stepper_z]
step_pin: PB3
dir_pin: PB2
enable_pin: !PA5
microsteps: 16
rotation_distance: 8
endstop_pin: probe:z_virtual_endstop
position_min: -10
position_max: 250
Parts Used
Link to LJ18A3 Sensor.
Link to Anycubic Mega Zero V2.
Category: 3D Printer Parts