My Eggy Phone Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hi friends, I don't know for you but I'm always using a phone support. 3D printing is a real pleasure for that kind of…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Hi friends,
I don't know for you but I'm always using a phone support. 3D printing is a real pleasure for that kind of use.
There are many on Tingiverse but I created my own with my personal requierments.
So, I present you My Eggy Phone Support, the egg shaped support. I made it with 2 ideas: a small support and multiple inclinations.
With MEPS, you can use your phone in portrait or landscape, vertically or at 20° or 45°.
The protrusion on one side, opposite to the 45° nick is not intended to put the support on the wall but to avoid a fall with long phones !
I made a low size version (20 mm) with a place to put the usb cable, if needed, in landscape position.
I made a taller (60 mm) version to allow the use of usb cable in portrait mode.
That is simple but I use it every day for months and I am happy with. Hope you will be too.
December 3,2018: For faster print, I've added a basic version without place for cable at the center.
Bonjour chez vous.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
I made with 20% infill but 10% works fine too.
Category: Mobile Phone