Elephant - Decoration
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The picture shows the Elephant-single-1.stl. If somebody want to print exactly the same.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 30
- Makes
- 0
- Views
- 469
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The picture shows the Elephant-single-1.stl. If somebody want to print exactly the same.
I made the ears & co a little wider at the Elephant-single-2.stl, so they should be printed at 100%. (It should look the same as the multi-print (https://www.prusaprinters.org/prints/1970-elephant-multi-decoration)).
This one is printed:
x70%, y70%, z100% (133mm x 104.70mm x 5mm)
20% infill
Layer change: 2.15 first (14); 3.20 second (21); 4.10 third change (27).
Filament black: Polyalchemy
other Filament: MakerGeeks
(The last picture shows the single print (70%) and the multi color print (100%) together.)
Print instructions
Please pay attention to temperature after layer change.