1/2 NPT [shower] to 1/4 barb
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1/2 NPT shower to 1/4 OD barb (ID of tube) this tread has a 1.78deg taper so not sure it will fit ( it did fit without…
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 453
- Makes
- 0
- Views
- 1,197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
1/2 NPT shower to 1/4 OD barb (ID of tube) this tread has a 1.78deg taper so not sure it will fit ( it did fit without the taper for 1/4 in of tread engagement .. .this should help to engage fully)
other side is 1/4 barb but its "oversized" a bit so its really tight...
should print flat with a brim but i line to add an angle with support so as to move the shear angle a bit.
EDIT : reup a new file the other was way off! not tested so ... print at your own risk ;-)
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: Bathroom