Buggy Motor Pinion and Pulley for D3530
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Motor pinion and drive pulley for 3DSets Buggy with a FlashHobby D3530 1400KV Brushless Outrunner Motor. The drive…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 79
- Makes
- 0
- Views
- 423
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Motor pinion and drive pulley for 3DSets Buggy with a FlashHobby D3530 1400KV Brushless Outrunner Motor.
The drive pinion is hollow to slide over the motor shaft. Use a hobby knife to clear the thin cover over the hole for the motor shaft. Attach with 3 M2.5 x 8mm screws and blue thread lock.
The drive pulley is installed as per the instructions. It is not necessary to screw the pulley to the pinion when used with this motor - the distance is correct and prevents the pulley from rubbing and melting.
Print in PLA+, ASA, ABS, or other higher temperature filament with 100% infill. For best results, print more than one at a time to allow each layer to cool, and for spares.
Motor: https://www.amazon.com/gp/product/B08B1BTZR6
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
Rafts:
No
Supports:
No
Resolution:
200
Infill:
100
Filament: Sunlu PLA+ any
Notes:
Any high-temperature material will do.
Category: R/C Vehicles