PI 400 Motherboard case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standalone PI400 motherboard case.
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 327
- Makes
- 1
- Views
- 2,454
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I found the pi 400 keyboard pretty unusable and wanted to use the processing of the pi 400 for another project.
Print in some non conductive filament, personally I printed it in some overture PLA pro, But any PLA should work. I'm not sure how the model would deal with the shrinkage from ABS.
Additional materials needed-
- 6x m3x5x4mm heat set inserts
- 6x m3x8
It could be modeled with some m3 nuts/magnets….. but its a reasonably large model and m3 threaded nuts are more usable through the many iterations than magnets glued in and m3 nuts that cant be removed from the capture slots……. and the insert holes are easier to model.
It should be printable on an ender 3 or mk3 if you print without a skirt. Supports are needed, but they should be easy enough to remove.
I've included an extremely messy f3d file if anyone wants to modify it to suit their own needs.