FLSUN SR Feet Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Description: The original FLSUN SR feet are extremely small rubber disks which provide a minimal contact area for the…
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 148
- Makes
- 1
- Views
- 942
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Description:
The original FLSUN SR feet are extremely small rubber disks which provide a minimal contact area for the printer to rest on as well as limit the amount of air which can be drawn in by the PSU fan (causing a noticeable whine on some surfaces).
I designed this as a replacement for the existing feet to increase the height between the PSU in the base of the SR and the workbench and allow greater airflow, thereby reducing the higher pitch noise. It also increases the overall surface area in contact with the workbench, which may aid in reducing stability problems (similar design for the Q5 made a significant difference, though didn't see much if any improvement in that regard on the SR myself - the chassis is already far more stable).
The design also encompasses a rounded corner which covers the base of the three arms, prevbenting scratches from the bare metal and improving the look of the printer as a whole.
Please Note:
The original feet and screws on the base of the printer are used to attach the feet securely.
Print Settings:
• Brim - No or max 1.5 mm (any higher exceeds the build plate area)
• Support - No
Print Settings
Printer:
FLSUN SR
Rafts:
No
Supports:
No
Resolution:
200
Infill:
25
Filament:
Sunlu PLA+
Black
Notes:
Recommend using a minimum of 20% infill
Category: 3D Printer Parts