Deltaprintr Extruder Upper Block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extruder upper Block for Deltaprintr. This block replaces the original wooden upper part of the extruder on the…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Extruder upper Block for Deltaprintr.
This block replaces the original wooden upper part of the extruder on the Deltaprintr.
You may have to drill the holes with a 3mm drill so the filament and the screws fit.
But don't drill the lower hole where the Pulley goes into. If you don't drill all the way down the screw will hold better in place.
Please use the alternative Version if you want to use the original screw.
Important: please be sure you'll drill the screw that goes into the Extruder-Motor as straight as possible.
Otherwise the printed part won't lay flat on the wooden-Extruder-mount
Print Settings
Printer Brand:
Deltaprintr
Printer:
Deltaprintr Kit
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.25
Infill:
15
Notes:
I printed it as in the .stl provided "upside-down".
If youre printing it "laying on the side" you may have to clean it up more.
If you're printing it upside down like me you may need support or a proper cooling and slower speed.
Post-Printing
You may have to drill the holes with a 3mm drill so the filament and the screws fit.
But don't drill the lower hole where the Pulley goes into. If you don't drill all the way down the screw will hold better in place.
The original washer may not be needed anymore.
Test it and please let me know if I can improve the design
Category: 3D Printer Parts