2.5 inchgrinding jig guide
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.03 – €2.48 net (excluding VAT)
For file: 2.5 inch guide_0.2mm_PLA_MK3SMMU2S_2h27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.26 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 2.45 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tool to set a 2.5 inch depth for sharpening woodturning tools on a grinder.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I made this tool for a friend that's into wood turning. It's used to set tool depth in a jig before it gets put to a grinding wheel for sharpening. Mainly to ensure consistency every time it's sharpened. This means less metal from the tool is removed each time, which leads to longer tool life. The Prusa slicer keeps tagging the file name with PLA, but it has been sliced for PETG. The picture I'm using here is from a print I made that was actually 2.25 inches because I made a miscalculation when I was designing it.