1 / 2
RPI MHS-3.5inch display 40 extrusion mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Casing for the RPI MHS-3.5inch display to mount to an 40mm wide extrusion
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 79
- Makes
- 0
- Views
- 703
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I needed to mount my MHS-3.5inch RPI display to my Ender 3 as a replacement for the original display. The display is about the same angle as the original display.
- You need to cut the ‘fan’ pins from the pcb else the ‘lcd support’ won't fit.
- 4xM3 screws to mount the LCD support to the frontplate
- The optional pen holder needs to be glued to the side of the backplate
This is the display used: http://www.lcdwiki.com/MHS-3.5inch_RPi_Display