1 / 5
Extinguisher Spray Holder (universal size)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had to make extingiusher holders for our workshops and rooms.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 42
- Makes
- 0
- Views
- 391
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I had to make extingiusher holders for our workshops and rooms. Our "fire fight sprays" are 65mm in diameter, but you can easily rescale. I made it with 0,3mm layer thickness, 3 plies walls and 50% "triangles" fill. 5 sets took 5 hours on our i3 mk3s, almost all speeds were close to 200 m/s.
Print instructions
For extinguishers (or other sprays) of reasonable weight, just rescale by appropriate factor - original diameter is 65 mm. After rescaling, just use somewhat bigger/smaller screw.