1 / 6
Molex to 12v barrel plug
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This also requires two female FRD2 terminals. I don't know how common these are, as I pulled out a terminal set from…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This also requires two female FRD2 terminals. I don't know how common these are, as I pulled out a terminal set from the early 80s. They may need to be stretched ever so slightly, but fit nicely. No need to snip your case fans' lines.
The print shown is the first design I made. It occurred to me that if I flipped it, I could stick it to the wall flat. I have not printed it yet, though it should be fine as well.
.2 height at least.
Category: DIY