CNC 3018 Pro - USB Endoscope Camera Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera holder primary for a 3018 Router but can be used anywhere. This will fit a 7-8 mm USB camera similar to this:…
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 114
- Makes
- 0
- Views
- 952
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Camera holder primary for a 3018 Router but can be used anywhere.
This will fit a 7-8 mm USB camera similar to this: https://www.amazon.com/Inspection-Endoscope-Borescope-Smartphone-Stylustar/dp/B087722FPS/ref=sr_1_51?dchild=1&keywords=usb+endoscope+camera&qid=1604510972&sr=8-51
I´ve included 2 camera mounts. One closed and another open to fit slightily bigger cameras.
All screws are 3mm.
Part_A should me glued to the base with CA glue or similar, I didn´t get good results with double-side tape.
Part_F is a lens protection mount, I´ve used a small acrylic piece I had laying around and glued it so any metal bit that eventually flys to the camera won´t damage the lens.
Please enjoy!
If you like my work please consider supporting it.
Print Settings
Printer:
Zonestar 802N with Mix Head
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
50% or more
Filament:
3D Fila ABS
Orange
Notes:
Filament Used: 3D Fila Orange ABS (Brazil): https://3dfila.com.br/produto/filamento-abs-premium-laranja-siena/
Category: Parts