Stearman PT17 Hack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If You have bought the Stearman PT17 fra 3d labprint:https://3dlabprint.com/shop/stearman-pt-17-kaydet/ With this…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If You have bought the Stearman PT17 fra 3d labprint: https://3dlabprint.com/shop/stearman-pt-17-kaydet/
With this hack, you dont need to reverse the shaft!
(This includes only a hack - not the starmotor!
- You might have realized that You have to reverse the shaft of the motor, which I didnt succede in doing cause one of the screws holding the shaft is stuck.
If You want to reverse the shaft, take a look here: https://www.youtube.com/watch?v=4jSix3rUI2E
The motor is: Turnigy 3542/5 1000-1250KV
I have added an stl model with the support 1 mm thicker for those of you with a smaller motor. It seems thou that the Turnigy Aerodrive SK3 only has 3 holes in the back for fastening, and my has 4 - if that is correct I have to make a more timeconsuming alteration of the original!
The 4 bolds are DIN917 M3 x 16mm. You have to expand the hole in the front of the starmotor one mm or so, with a roundfile!
Category: R/C Vehicles