Lezyne-Ergon bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to mount Lezyne saddle bag to Ergon seat
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 479
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I bought an Ergon Seat for my mountainbike.
It came with a bracket to mount a toppeak saddle bag.
Unfortunately, this bracket did not fit my Lezyne Saddle bag.
So I made a small bracket, to fit the Lezyne saddle bag to my Ergon seat.
It works perfectly, keeps the bag away from my seat dropper and it sits higher than the original bracket to mount it to the rails.
I printed mine using ASA, because of the outdoor nature of mountainbiking...
But my test prints were made using PETG, and seemed strong enough for sure.
I recommend at least 3 perimeters and 50% infill for strength.
no supports needed.
I added gcode files for 0.4mm and 0.6mm nozzles for both PETG and ASA.