1 / 3
Magnetic Star Trek Com Badge (8mm magnets) — image 1
1 / 3

Magnetic Star Trek Com Badge (8mm magnets)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I liked the original model that I remixed from, but I have 8mm magnets and the original designed used something…

Rating
0 / 5
Likes
18
Downloads
86
Makes
0
Views
486
Reviews
0

Updated at source:

Model information

Category
Props
License
Creative Commons — Attribution — Noncommercial

I liked the original model that I remixed from, but I have 8mm magnets and the original designed used something smaller.

My magnets measure about 8mm x 2.7mm. I've tried to not cut tolerances too tight. I believe I am using https://www.amazon.com/gp/product/B07DD61G2F

here, the silver is just a filament change at (about) the right place. I may redesign this so the badge is two (or more) parts so you print silver and a gold separately (similar to the use of inlays in my in my Klingon Badge).

Export of Fusion 360 project included.

Also see my Star Trek Klingon Badge using 8mm magnets. https://www.thingiverse.com/thing:3956156

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

15%

Filament: CC3D and Hatchbox PLA, 1.75 Silk Silver (CC3D) and Gold (Hatchbox)


Notes:

The bottom of the Com Badge part has a recess for the battery. I used supports to assist with this although probably this isn't necessary for most printers.

I placed a color change at about 7mm height, the first layer above the rounded part. This enabled the top of the badge to be silver.

Post-Printing

Use CA glue to affix the magnets, if necessary.

How I Designed This

Brought the original model's .SKP file into Fusion 360. Created BREPs from the Meshs. Cleaned up the models a touch. Filled in the existing magnet recesses. Created my own magnet recesses. Exported as .STL.

I've included my Fusion 360 export.

Category: Props

Tags