Three Prong AC Plug
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a component of a prototype I created (designed in Fusion 360). While my model didn't prove to be useful, I…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 91
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Architecture & Urbanism
- License
- Creative Commons — Attribution — Noncommercial
This is a component of a prototype I created (designed in Fusion 360). While my model didn't prove to be useful, I decided this individual component might be helpful to someone else.
My gut reaction is that supports are absolutely required. I needed to trim the model just a bit with an X-Acto knife where there were supports (at the bottom of the blades/prongs).
One probably doesn't need 70% infill. If I re-printed this, I'd probably go lower, like 25%?
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
Yes
Supports:
Yes
Resolution:
0.20mm
Infill:
70%
How I Designed This
Modelled in Fusion 360
I designed this by first looking up the specifications for USA three prong AC plugs and then modeled it in Fusion 360.
Category: Buildings & Structures