First Layer Test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some test files to adjust your settings to get the perfect first layer. These will print 1 layer provided you are…
- Rating
- 5 / 5
- Likes
- 131
- Downloads
- 14,066
- Makes
- 13
- Views
- 34,146
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Some test files to adjust your settings to get the perfect first layer. These will print 1 layer provided you are using a 0.2 mm layer height in your slicer settings. Then inspect your print and tweak one setting at a time until you get a perfect first layer as that is the most important layer.
Once you get a good result with the simple shapes, try the extreme test. If you can get that to print without any gaps, then you have a perfect first layer.
Print Settings
Printer:
Creality CR-10
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
None
How I Designed This
Fusion 360
Category: 3D Printing Tests