Bed Adhesion Test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pretty simple cylinder. Good test to see how well your prints stick to the bed. Use the 40mm tall one to test various…
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 634
- Makes
- 5
- Views
- 3,979
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Pretty simple cylinder. Good test to see how well your prints stick to the bed.
Use the 40mm tall one to test various temperature settings and/or other settings until you find the one that sticks nice and firm to the bed after the print has finished. Once you have found the best setting, try the 100mm tall one. If it's still standing at the end of the print, your bed adhesion is good.
Mine stuck just fine using an Ikea mirror...no tape, glue, hairspray, etc. I find that 70C for the first layer and then 60C after that works the best for me with PLA.
Print Settings
Printer:
Creality CR-10
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
32%
Category: 3D Printing Tests