RatRig Vcore-3 MGN9 carbon gantry
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is my design for mounting a carbon square tube and MGN9H rails on RatRig Vcore3 Plus XY-joiners reinforced
- Rating
- 0 / 5
- Likes
- 44
- Downloads
- 244
- Makes
- 1
- Views
- 3,402
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Here is my design for mounting a carbon square tube and MGN9H rails on RatRig Vcore-3.
This also solves some issues while tightening XY joiner plates and pulleys/idlers alignement.
Note1: New XY joiners can be used on it’s own with original 2020 aluminium extrusion but you still need shoulder screws.
Note2: Original MGN12 linear rail can be retained if you are not looking for big weight reduction. Simply drill carbon tube accordingly
[20220313] Added reinforced X_endstop that come flush with XY left joiner (only for use with MGN9).
[20220624] Increase tolerancy on Carbon tube insert for better fitting with nylstop nuts
XY joiners rev1.1: aesthetic change plus weight reduction
---Parts---
- Left/Right XY joiners (printed)
- 4x Shoulder screws D5x50mm M4 + nuts
- 4x M5x30mm socket head screw
- 2x M5x10mm socket head screw
- carbon tube insert (printed)
- 6x M5x7x6mm brass inserts
- 2020 carbon square tube
- MGN9H linear rail
- X_endstop_MGN9H (printed)
---Tools---
- Drilling guide (holes for XY joiners) (printed)
- MGN9 aligning tool (printed)
Print Settings
Printer:
RatRig Vcore-3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Filament:
/ ABS/ASA/Nylon-CF
Notes:
Layer height: 0.2
Perimeters width: 0.45
4 perimeters
Category: 3D Printer Parts