Brake Lever Clamp 22mm Bars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use at your own risk. Strongly suggest you print in Nylon or similarly strong material. This was designed as a…
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 76
- Makes
- 1
- Views
- 349
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
Use at your own risk. Strongly suggest you print in Nylon or similarly strong material.
This was designed as a temporary mount, until I get hold of a metal replacement, or finally get a mini CNC.
Designed for 22mm bars and the spacing of the holes is 32mm.
There are two styles, rounded and squared off. Narrow and wide versions.
Print on it's side and use supports for the holes.
23Aug21
Made a minor change to the design. The V1 STL's have had 1mm removed from the bottom as I found there wasn't enough gap between the halves to get a good clamping force.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
Yes
Resolution:
0.10mm Layer Height
Infill:
20%
Filament:
Any Nylon recommended
Notes:
Print on the side.
Use supports for the holes.
Category: Sport & Outdoors