1 / 12
Mugi Nose Skid Wing Tips Skids & Motor Mounts — image 1
1 / 12

Mugi Nose Skid Wing Tips Skids & Motor Mounts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Nose Skid for the Mugi Coreflute / Correx / Corro Flying Wing Plus some wing tip skids and motor mounts! Nose skid…

Rating
0 / 5
Likes
1
Downloads
40
Makes
0
Views
423
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Nose Skid for the Mugi Coreflute / Correx / Corro Flying Wing

Plus some wing tip skids and motor mounts!

Nose skid also has a hole in it so you can add a wheel. Or you can use the skid as a hook for bungy launching

Raised platform keeps prop off the ground and 12 deg tilted motor mount for the Turnigy 2826 2200kV motor rounds out the picture.

Print everything with 100% infill (i.e. solid) except for the nose skid. No need for support on the engine mounts or wing tip skids if printed as per the pictures.

Print nose skid with 1.2mm shell / 4 layers and 30% infill as a minimum. Also as the base is curved use raft or supports.

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

Yes

Supports:

No

Resolution:

0.15 or 0.2mm

Infill:

30% for nose skid, 100% for everything else

Filament: Any PLA Black


Notes:

Use raft of support for nose skid as base is curved. 30% infill and 4 layers minimum.
Everything else can be printed 100% fill and no support if printed as per pictures.

Category: R/C Vehicles

Tags