1 / 6
Pencil holder with adjustable height
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple pencil holder but you can adjust the height depending on the size of your pencil.
- Rating
- 5 / 5
- Likes
- 108
- Downloads
- 206
- Makes
- 3
- Views
- 1,450
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Instructions to build the pencil holder
- print the parts upright, no support needed
I recommend 0.2 mm layer height for smooth movement, 0.3 mm works as well but it will probably require a bit of use to be smooth.
- Insert the cup into the pivot, if it is not smooth use some force.
- Then insert the guide all the way, it should come out of the other side by 2 mm.
- Now get the guide into the grooves of the base and glue it in place. I used a bit of super glue.
- When the glue is dry, you can turn the base to adjust the height of the cup !
