PMount AR Wall Hanger Rifle Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed a way to discretely store my rifles in a locked closet. The walls are rather soft, so I didn't want them…
- Rating
- 5 / 5
- Likes
- 76
- Downloads
- 632
- Makes
- 4
- Views
- 2,418
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
Needed a way to discretely store my rifles in a locked closet. The walls are rather soft, so I didn't want them leaning on the drywall--scratching the walls and getting dust everywhere.
This mount allows the rifle to mounted vertically or horizontally. There is a groove on either side that engages the magazine catch to secure the rifle muzzle up, muzzle down, left, or right..
You may need to scale it up by 2540%. Designed in inches, most slicers use mm. STLs are unitless.
Print Settings
Printer:
Qidi Tech 1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2 to .3
Infill:
20%
Filament:
Cheapo ABS or PLA
Any
Notes:
You'll note a gusset on one end of the part. This part should be toward the bed. It adds a little stiffness to the print and provides more surface area for bed adhesion.
Mounting
There are six holes present on the model. I used cheap walmart wall anchors and would suggest using at least 3 of the six holes to mount it. Two on one side, one on the other.
Category: Sport & Outdoors