9x35 Milling Machine Table Protector Tray Cleat (PM-935)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Downloadable parts for this YouTube video: https://youtu.be/VzWYgwVHggE This is a cleat designed to anchor a 1/4…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 47
- Makes
- 0
- Views
- 591
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Downloadable parts for this YouTube video:
This is a cleat designed to anchor a 1/4 Aluminum Sheet Pan to a milling machine table to protect the table, keep chips out of the slots, and provide a handy place to set tools while working.
*This site contains affiliate links for which I may be compensated
Aluminum Quarter Sheet Pans (Amazon): https://www.amazon.com/s?k=aluminum+quarter+sheet+pan&linkCode=sl2&tag=clll016-20&linkId=da83c56a94852dc09c77e9e9fbf08bd6&language=en_US&ref_=as_li_ss_tl eSun Black PETG Filament, 1.75mm (Amazon): https://www.amazon.com/s?k=aluminum+quarter+sheet+pan&linkCode=sl2&tag=clll016-20&linkId=da83c56a94852dc09c77e9e9fbf08bd6&language=en_US&ref_=as_li_ss_tl
These are sized for 5/8" (16mm) T slots, and they should clip in neatly. The 1/4 sheet pan size is about right for a 9x35 mill with a 6" vise mounted to the center of the table.
There are three 1/4-20 holes modeled into each cleat on 4.5" centers for anchoring to the trays.
Print Settings
Printer:
MakerFarm i3v
Rafts:
No
Supports:
No
Resolution:
0.25mm
Infill:
30
Filament:
eSun PETG
Black
Notes:
I printed these in eSun PETG black, and this worked well for my usage.
[eSun](https://www.amazon.com/s?k=esun+filament&linkCode=ll2&tag=thingiverse09-20&linkId=ee95e18399f58ca8cf2c8c2b4b912c0c&language=en_US&ref_=as_li_ss_tl) Black PETG Filament, 1.75mm (Amazon*): [https://www.amazon.com/eSUN-1-75mm-Filament-Printer-Opaque/dp/B00ZAUQZTA/ref=as\_li\_ss\_tl?ie=UTF8&qid=1505943306&sr=8-1&keywords=esun+petg+black+1.75&linkCode=sl1&tag=clll016-20&linkId=64a5314ff65091af8c9b68fa3e06a7d7](https://www.amazon.com/eSUN-1-75mm-Filament-Printer-Opaque/dp/B00ZAUQZTA/ref=as_li_ss_tl?ie=UTF8&qid=1505943306&sr=8-1&keywords=esun+petg+black+1.75&linkCode=sl1&tag=thingiverse09-20&linkId=64a5314ff65091af8c9b68fa3e06a7d7)
Post-Printing
On most FDM printers, you will need to run a 1/4-20 tap through the holes after printing so the screws will thread in properly. The threads are modeled into the part, but most printers lack the control to print them perfectly.
Category: Machine Tools