1 / 10
Monoprice Select Mini V2 Hotend mount 40mm fan and adjustable radial cooling fan — image 1
1 / 10

Monoprice Select Mini V2 Hotend mount 40mm fan and adjustable radial cooling fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

My stock hotend cooling fan started making a lot of noise and I was wanting an adjustable height/removable part…

Rating
0 / 5
Likes
2
Downloads
15
Makes
0
Views
599
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

My stock hotend cooling fan started making a lot of noise and I was wanting an adjustable height/removable part cooling fan so I created this. The adjustable height is probably overkill and adds weight. Main parts printed in ABS for heat resistance and mounting pins printed in TPE. TPE is hard to print with the Mini Select but after a while feeding filament to the extruder, lots of glue stick, and SLOW speeds, I finally got some usable ones.

Inspired by: https://www.thingiverse.com/thing:2722203 https://www.thingiverse.com/thing:2745732

I purchased these fans:

Noctua NF-A4x20 FLX https://noctua.at/en/nf-a4x20-flx https://www.amazon.com/gp/product/B072JK9GX6

5015 (50x15mm radial fan) https://www.amazon.com/gp/product/B07R4TGMK3

Notes:

The 3D model of the 40mm fan in Fusion 360 is the Noctua NF-A4x10 FLX but the pins are designed for the 20mm deep version.

The numbers on the dial no longer correspond to anything since there is no slope hitting a switch 90 degrees from the part. I just used the dial as is.

Print Settings

Printer Brand:

Monoprice

Printer:

Select Mini

Rafts:

Yes

Supports:

Yes

Resolution:

0.13125

Infill:

33

Filament: Monoprice ABS+ Yellow

Category: 3D Printer Parts

Tags