Kindle 3 Keyboard Wall Mount Literary Clock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a wall mount I made to hold a Kindle 3 keyboard (wifi version) after reading the fantastic instructable linked…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 39
- Makes
- 0
- Views
- 538
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall mount I made to hold a Kindle 3 keyboard (wifi version) after reading the fantastic instructable linked below to put a literature quote on the screen for each minute of the day as a unique clock.
The side cutout is to access the page turning buttons which show the source of the quote on the screen.
https://www.instructables.com/id/Literary-Clock-Made-From-E-reader/
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
30
Notes:
I used a brim and supports in the side hole with no supports in the screw holes. This can be done in cura by setting supports to everywhere and using theSupport Blocking button to prevent support from clogging up the countersunk holes. You could also apply custom supports to just the side cutout.
I also used theAdaptive Layer Height setting in cura with a base of .2 which made the range of .1-.3 with mostly on the top of that range since it is a simple profile. That cut the print time estimate down from 12 to 8 hours.
Post-Printing
Remove support from button holes.
Mounting hardware
Quantity 1 or 2
.#6 or #8 screws
0.75" or 1" long
Use the linked instructable to setup kindle software https://www.instructables.com/id/Literary-Clock-Made-From-E-reader/
How I Designed This
I used calipers and these reference dimensions. https://ebookfriendly.com/4-generations-of-kindle-size-comparison-graphic-tip/
Original 15 August 2018
https://www.thingiverse.com/thing:3049959
Category: DIY