Simple Push Fit Joint Tolerance/Fit Test (Male/Female)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple print you can use to test the tolerances and how tight you want the fit when designing 3D models with…
- Rating
- 4.5 / 5
- Likes
- 20
- Downloads
- 438
- Makes
- 2
- Views
- 1,963
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
This is a simple print you can use to test the tolerances and how tight you want the fit when designing 3D models with push-fit joints. They are also keyring mountable/atachable!
It is reccomended you print a normal tolerance test first, such as this: https://www.thingiverse.com/thing:2318105, So you do not need to print all the 'female' parts.
You need to print:
1x MaleJoint.stl
AND
1x +0.0mm - +0.5mm
OR
1x each of the models from +0.0mm - +0.5mm (or as needed)
Follow me on Twitter! twitter.com/3DPrintingzzz
Category: 3D Printing Tests