1 / 6
Laserpecker Magnetic Shield Joiner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Joiners for the Magnetic Shields for the Laserpecker laser units
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 100
- Makes
- 0
- Views
- 477
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Joiners for the Magnetic Shields for the LaserPecker laser units as sold by LaserPecker.
The joiners allow to stack the shields one above the other and can be placed around the LaserPecker units to provide extra height protection.
The acrylic of the shields is approximately 2.63mm thick and the joiners are designed as appropriately.
Two are recommended per shield.
Material: Any / PLA
Layer Height: Any / 0.3mm
Infill: Any but 15%+ recommended