Lack Enclosure Wyze Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was trying to find a Wyze camera mount that would work with the Lack table enclosure I am building. I couldn't find…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 462
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I was trying to find a Wyze camera mount that would work with the Lack table enclosure I am building. I couldn't find one pre-made so I designed one for what I wanted it to do. Made it in fusion360.
I used the wyze camera mount as the sock for my camera (https://www.thingiverse.com/thing:3315051)
Unless your bridging is really well-tuned I would suggest adding support and if placed from corner to corner with the long edge on the table it will fit an ender 3 bed 235X235
Hardware needed.
4 (#6 screws 3/4in long)
2 - m3 x 8 flat screw
2 - m3x4x5 embedding nut
the m3's are used to attach the sock to the stand and you will need a soldering iron to embedded the nuts into the two holes.
the size 6 screws are what I used to attach it to the lack table enclosure.
Version 3 - released 12/15/2020 - Fixed the offset of the main bar so that it will sit flush on the table
Version 2 - release 12/14/2020 - Made the structures wider as too much sway in the thin arms in version 1
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
50%
Filament: xvico PLA rainbow
Notes:
I would recommend support for the entire thing not just the from the bed. Will need some cleanup to remove the nubs they leave though.
Category: Other