Replacement bracket for Playmobil excavator 3001 / Halteklammer für Playmobil Bagger 3001
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.98 – €1.20 net (excluding VAT)
For file: Replacement Bracket Excavator 3001_0.1mm_PLA_MINI_1h28m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.09 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 1.46 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Self designed replacement for the red bracket that holds the arm of the excavator in an upright position.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 71
- Makes
- 1
- Views
- 595
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Update: This was my first self designed part and it is still in pretty good shape and works very well after nearly two years in service!
With the red bracket broken, that holds the arm of the excavator in an upright position, fun was greatly reduced so I designed a replacement part.
Sure, it's more beefy than the original one but it blends nicely with the other black parts of the machine.
Just flip out the broken one with a flat head screw driver and squeeze the new one in. Flexes enough to get it in but gives it a nice tight fit.
Best printed as shown in the picture. My Mini+ handled the overhangs even at that the snap fit well enough. Could be printed laying on its side as well.
No special print recommendations, PLA works, no supports needed.