Nespresso Capsule Holder / Stand (Square - 20 Capsules)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.69 – €8.18 net (excluding VAT)
For file: nespresso_capsule_holder_stand_triangular_06n_0.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.43 excluding VAT (range midpoint).
- Weight reported by the author
- 148 g
- Print time reported by the author
- 4.8 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a square version of my Triangular Nespresso Capsule Holder (https://www.prusaprinters.org/prints/20307).
- Rating
- 0 / 5
- Likes
- 52
- Downloads
- 566
- Makes
- 2
- Views
- 2,431
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a square version of my Triangular Nespresso Capsule Holder (https://www.prusaprinters.org/prints/20307).
This capsule holders takes 20 Nespresso or Nespresso Compatible capsules.
Print instructions
This can be printed at any layerheight, but I found it to look nicer with a thicker layer height which is also more forgiven with ringing or other artifacts.
I print mine with the following settings:
Nozzle: 0.6mm
Layer height: 0.4mm
Speed: 40-45 mm/s for all speed settings
Infill: Rectilinear @ 15%.
If you like this model, please leave a like and comment / make :)