Mini-reel tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple tray design to hold mini-reels.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 37
- Makes
- 0
- Views
- 368
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
This is a tray for our mini-reel design.
Note: I updated this design to a tray with insertable separator panels.
The design is in OpenSCAD, and all dimensions are configurable with the “customizer” of OpenSCAD. The ready-to-print STL files have a length of 190mm and separated in two “compartments”; these are suitable for 100mm diameter mini-reels.
There is one STL file with an open end (and one where the end is closed). Both are generated from the same OpenSCAD file. Our goal was to have a tray of 380mm long, to fit on the shelves in our storage. But this is too big for our printer (Prusa MK3S), which is why we glue a standard tray and an open-ended tray together, to form a longer tray.