Sewing- Machine Motor Mount and pulley counter-shaft for Watchmakers Lathe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a handy package for using a sewing-machine motor (with foot speed control) with a watchmakers lathe. I chose…
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 124
- Makes
- 0
- Views
- 1,982
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a handy package for using a sewing-machine motor (with foot speed control) with a watchmakers lathe. I chose to step the speed right down with a massive 120mm pulley - you can certainly get all the torque you need with this!
The motor is ebay "nahmotor" YDK YM-261C-12 230v 50hz 120W 0.5A 7000rpm
You need about 150mm of 8mm rod - silver steel would do but I got stainless intended for making 3D printers etc off amazon: https://www.amazon.co.uk/gp/product/B07T5SYYTZ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
I used 2 deep groove ball bearings - the same size you use for skateboard wheels so very common: https://www.amazon.co.uk/gp/product/B00WXDAUQG/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
And 2 lock collars https://www.amazon.co.uk/gp/product/B08BLLHLBZ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
For my Ender3 v2 everything just push fits (might need gentle banging to get lullies on shaft, but then you don't need any other locking device)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
Standard
Infill:
20%
Filament: any PLA any
Category: Machine Tools