Funnel to fill NeilMed Sinus Rinse bottle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This funnel attaches to the NeilMed Sinus Rinse bottle to aid in filling with distilled water
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 104
- Makes
- 1
- Views
- 661
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This funnel threads onto the NeilMed Sinus Rinse bottle (https://shopca.neilmed.com/products/sinus-rinse-kit-with-50-packets) and aids in filling with distilled water. (Often, distilled water is purchased in large jugs that are difficult to pour into the small bottle opening.)
Key features:
- Funnel directs water all the way into the neck of bottle for no leaks
- Venting to allow air into the bottle for quick filling
Dimensions:
- Funnel is 30 mm high and 60 mm wide
- Threading is 23.6 mm outer diameter and 21.6 mm inner diameter
- Filling hole is 15 mm outer diameter (goes into the bottle).
I print this upside down on the Prusa satin sheet with no brim.
I've created this with OpenSCAD and it's fully parameterized. If you would like a different size, please message me and I should be able to create it quickly.
I've used the following libraries:
- threads.scad: https://dkprojects.net/openscad-threads/
- knurledFinishLib_v2.scad: http://www.thingiverse.com/thing:31122