Front mounted adjustable Z endstop for the Tevo Tarantula
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've remixed thingirob's adjustable Z endstop and added a mounting bracket for the microswitch, so that you can mount…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I've remixed thingirob's adjustable Z endstop and added a mounting bracket for the microswitch, so that you can mount it in front - which should make it easier to adjust.
Mostly because I run my lead screw in the middle of the 2040 extrusion and couldn't mount it there, so I had to figure out another way to install an adjustable screw.
You will need :
- M5 long bolt and nut, my tarantula came with extras of these
- zip tie (also included in the box) to secure the wires so they don't get caught in your Y-carriage or thumbwheels.
- M4 bolts and T-nuts
- 1x extruder spring (I guess if you use the Tevo Titan, you can cannibalise the one from the blue-and-gold stock extruder)
Print Settings
Printer:
Tevo Tarantula
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
50% at least
Notes:
The holes for the microswitch are 2.0mm without any extra offsets for expansion. This is because printing it upright kind of stretches that hole anyways. It should be a tight fit, or else that microswitch will be shifting...
Category: 3D Printer Parts