1 / 7
DIN rail clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIN rail clip for prototyping station.
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 503
- Makes
- 0
- Views
- 2,254
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Print settings:
- layer height: 0,2 mm
- perimeters: 2
- infill: 15% (gyroid pattern)
There are 2 clip sizes. One is normal and one is thick. Thick clip is meant if you want to move clip all the way to the holder. In that case, the attachment goes over the holder.
If using normal size clip, attachment will hit the holder.
Normal clip
- Uses less material
- Faster to print
- M3 x 8 screws are needed (can also use M3 x 10 or M3 x 12)
Thick clip
- Goes over the holder
- M3 x 12 screws are needed (can also use M3 x 15 or M3 x 16)
Additional material
You will need 2 M3 screws and 2 M3 nuts to fix the attachment to the clip. For attachments see my collection DIN rail prototyping station.