Simple brace for PVC pipe 1kg Filament Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With a couple of these and a short piece of 1-1/2" PVC tubing, makes a filament spool holder.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 101
- Makes
- 1
- Views
- 498
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I have a couple of sealed document boxes that I used for dryboxes for longer-term storage of humidity-sensitive spools of filament. I didn't want the spools touching the silica gel beeds covering the bottom, so, I made this bracket that confidently clips onto a 1-½" PVC pipe and makes a wonderful spool holder and holds 3-4 spools and fits nicely inside the box.
I recommend printing in PETG for a long service life. PLA will likely “creep” (deform) over time.
This fits my 1-½" PVC tubing with confidence because the diameter of the tube clip is 33.5mm (about 1.3"). If you use a different size PVC tube, you might want to adjust the model, so I'm including it herein as a STEP file. Enjoy. =)