DEPRECATED: Terran Pistol MK1.3 Slide Action, Full/Half Length Blaster

This revision has been superseded by the MK2.0! https://www.printables.com/model/1005571-terran-pistol-mk20-slide-prime-primary-blaster

Terran Pistol- a slide action, 3d printed NERF-like blaster based on the Dart Pistol from Terraria.

It can take full or half length magazines (halfs in an adapter are recommended) and shares many parts with existing designs from CaptainSlug to make assembly easier and hardware obtainment simpler. My personal prototype is hitting between 180fps and 210fps with elite darts. War tested! Anneal the plunger! nismo approved!

Because this is the initial release, I am willing to make any necessary tolerance changes or small modifications as needed for anyone building one of these. I am available on Discord @noreason #4172.

HARDWARE LIST:

https://docs.google.com/document/d/1HM5qTPaLoZLbe06pLRPkwgJQdXY74sOFejl-s_-X3EQ/edit?usp=sharing

Assembly guide is included in the files, along with a STEP and some optional rails. I've built a full blaster without a ton of difficulty but rail files are untested.

REVISION NOTES:

9/19/21- Added QuietSlide which uses less filament and should be quieter than the standard slide.

9/26/21- Revised Plunger with larger o ring groove and spring guide to improve performance and to try and resolve an issue with spring compression.

9/27/21- Slightly changed grip screw holes

File modifications and remixes are encouraged, but please ask before selling hardware or prints.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Resolution:

0.28

Infill: 

30%

Filament: Fusion Filaments PLA Reactor Red

Notes:

Some supports are required but most parts don't need any. Print with 3+ walls.

The assembly guide has more notes on printing.

Category: Mechanical Toys