1 / 9
Adjustable TPU Foot Cap for Normal 16mm Purlin Bolt — image 1
1 / 9

Adjustable TPU Foot Cap for Normal 16mm Purlin Bolt

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a TPU 95A designed Foot Cap to fit onto a standard 16mm Purlin Bolt

Rating
0 / 5
Likes
1
Downloads
20
Makes
0
Views
245
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

This was made originally for a microwave stand I welded up. I welded the nut into some RHS and ground it flat on the edges then you can use the bolt with the printed TPU rubber cap as an adjustable height foot for levelling etc. The example print file has had print speed slowed down for TPU. At full speed to only takes around 25 minutes per cap.