portafilter handle for rok espresso
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After several years in use, the portafilter handle of my ROK espresso maker finally started to disintegrate. Yet…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 29
- Makes
- 0
- Views
- 403
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After several years in use, the portafilter handle of my ROK espresso maker finally started to disintegrate. Yet another opportunity to utilize the printer!
I also made it a bit larger; actually too large, so there are 2 versions: the oversized one that I printed (and can be seen on the picture) and another one of moderate size. Whatever fits your hands. The caption is in German and says "handle". Because contrary to it's dildoesque appearance it actually is a handle.
Print Settings
Printer Brand:
Wanhao
Printer:
Duplicator9
Rafts:
No
Supports:
Yes
Resolution:
0,25mm
Infill:
20%
Filament: filamentive bioPC black
Notes:
Every possible measures to increase layer bonding is highly recommended. So print hot, slow, without fan, solid or with a lot of walls, etc...
I chose bioPC (which actually more behaves like some kind of CPE instead of PC) since it's maybe able to fulfill the heat and shock criterions in long term. Which I doubt. But let's see.edit: This one lasted about 20 espressi and then cracked at the same spot as the original one. So I've printed the smaller version with Filamentive's ONE PET (recycled plastic bottles) with 100% infill. Now this one feels almost indestructible.
Category: Kitchen & Dining