Saeco magic deluxe replacement part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement part for the Saeco magic deluxe (should also fit the Philips/Saeco Royal -->…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 47
- Makes
- 0
- Views
- 621
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement part for the Saeco magic deluxe (should also fit the Philips/Saeco Royal --> https://www.philips.ch/c-p/RI9913_06/royal-kaffeevollautomat ) - a ~20 year old fully automated coffee machine one of my working colleagues still uses.
He says that this is the part that most often gets broken (and is rather expensive) - however I'm unable to see how and why the original part breaks so easily; but being able to reproduce it after each demolition should mitigate the nuisance somehow.
This is version #1. And it seems to work fine and fits well - which raises a suspicion... usually the parts I design are good enough for every-day use after (too) many iterations. So If you make out some issues, please tell me.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
Yes
Resolution:
0,1mm
Infill:
100%
Notes:
Seems to come out nicely with the outlets on the bottom-side. This is also the alignment that uses the least amount of support - which is mandatory unfortunately. You'll also want to have it in a material, able to stand some heat and which is food-safe, which is why I once again chose Extrudr's GreenTec BDP; which doesn't seem to soften after some minutes in boiling water. Maybe even PETG is good enough for that short period of water-contact?
Category: Replacement Parts