Raspberry Pi camera mount for duplicator i3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a camera mount for attaching a raspberry pi camera board onto a duplicator i3 v2.1. The POV will follow the…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a camera mount for attaching a raspberry pi camera board onto a duplicator i3 v2.1.
The POV will follow the Z-axis and therefore gives a nice overview of your print from bottom to top.
There's one version (39) which can be attached onto the left side of the x-gantry without obstructing anything, but will decrease the x axis width if attached to the right.
If you prefer right, like I do, print the version #49 which is longer and therefore gives a better view (I've added 2 pictures that are supposed to show the POV). The downside of this version is that it's rather flimsy and prone to vibrations.
For installation you'll need 4, resp. 2 pieces of M3x10 screws. The original ones will be too short.
Category: 3D Printer Accessories