1 / 2
stickerless mini square-1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
42mm fully printed support free square-1
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 90
- Makes
- 2
- Views
- 920
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial
parts:
- edge - 8x
- corner - 8x
- core1 - 2x
- core2 - 2x
- antipop - 2x
- top caps - 2x
- side caps - 2x
- front caps - 2x
- screw with diameter less than 3,4mm and lenght 35-40mm
- pen spring
assembly:
- Glue core1 and core2 together with superglue and try to get them perfectly alligned and do this to the other side.
- After the glue dries you can assemble the cube. There is hole for the antipop, so screw the cores with two antipops.
- Then just push the caps to the holes and it should work but I recommend sanding the pieces, co the cube work a bit smoothly and after that it has even some decent cornercutting.
I added stl´s for separate caps if you need to print them separately.