Wall mounting adapter for "Raspberry Pi 7 Inch Touchscreen display case" including Raspberry Pi 2 to 4B
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.66 – €0.81 net (excluding VAT)
For file: Wall Mounting Adapter 1_0.3mm_PLA_MK3S_36m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.73 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 36 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This are two wall mounting adapters to mount the "Raspberry Pi 7 Inch Touchscreen display case" by luc_e on a wall.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 79
- Makes
- 1
- Views
- 2,236
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v2.0
I wanted to mount my Raspberry Pi 4B including the original Raspberry 7 inch display in our garage on the wall.
I searched for a specific casing and found the design “Raspberry Pi 7 Inch Touchscreen display case” by luc_e (https://www.thingiverse.com/thing:1585924) to fit best for me.
But there were two issues for me:
a) The design was only for a Raspberry Pi 2 and Raspberry Pi 3.
b) There was no option or adapter for a mounting on the wall.
For issue a) I found the remix “Raspi7inch_Case_v4" by mazkagaz (https://www.thingiverse.com/thing:5355769) to solve this issue.
For issue b) I could not find any suitable or fitting wall mounting adapater(s) and so I decided, to design my own wall mounting adapters :-)
Mounting Instructions for my Wall Mounting Adapaters
Mount the whole casing as shown by luc_e, but do not yet screw the lid. Now insert four M3x10 mm screws (with allen key) in my wall mounting adapters (into the smaller, inner holes) through the lid and then screw tightly. Take care, that the four screws are fully inserted in the wall mounting adapters as otherwise the full casing might wobble on the wall . Then mount the whole casing with four 4mm screws (outer holes) on the wall. Length of the screws depends on the thickness of your wall. Behind the casing there is enough space for (at least my) USB power cable for the Raspberry.
I tested my wall mounting adapaters only with the following lid from luc_e: “Raspi7inch_Lid.stl”
Print Instructions (tested without any issues):
Print orientation as shown in the attached STL files
PLA
0.3 mm (for fast printing)
60% infill (I wanted to have strong and stable wall mounting adapaters, but I guess 25% or 30% will also do it)
No support
In case you want to adapt my wall mounting adapters by yourself (e.g. for other screw dimensions), I have attached my OpenSCAD files.