1 / 3
Ultimaker 2 Aluminum Extrusion 3D printer - Sides Bottom Bracket with rear I/O Panel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is just a quick design I made for the rear I/O of the printer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 356
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is just a quick design I made for the rear I/O of the printer. It replaces one of the bottom corner brackets and can fit a power connector, USB pass, ON/OFF switch (17.5x12mm cutout) and a fuse holder (panel mount fuse holder for 20x5 mm fuses, hole-diameter 12mm).
Update
I put the mounting holes for the USB pass on the right side (when looking from the back of the printer) because it was interfering with the z axis stepper.
Print instructions
Category: 3D Printer Parts Print Settings
Printer: Vulcanus V1 MGN12 upgrade
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2mm
Infill: 10%